Archive for June, 2021

Hino Dualcab Toolboxes and Extras

Reference no. 5044

A recently completed job for a dual cab Hino truck with many extras and accessories. The two large toolboxes have multiple storage drawers in one for small parts with a fixed shelf above while the other has adjustable shelves and two slide out parts organisers. The rear section of the tray has tie down track running around the full perimeter to allow many different options when strapping something to the tray. Also in the rear section are two gas bottle holders, a storage tub for a pair of wheel chocks, a swingout vice and a dual jerry can holder. We also fitted two batteries in an additional battery holder under the tray to power his 240V inverter, his interior door lights and the four work likes located at the front and rear of the toolboxes. Up on top of the headboard we also fitted a large work beacon controlled by a switch in the cab. Underneath we also fabricated an underbody toolbox and fitted a plastic water tank.

Sinclairs Components Insulated Toolboxes

Reference no. 5074 & 5075

A unique toolbox fabricated for Sinclair Components to fit to their truck bodies. These toolboxes feature an open bottom storage section, a small drawer at the top on one side and an internal storage hatch with its own door within the toolbox itself.

National Parks Gunsafes

Reference no. 5049

We were recently contacted by some rangers for the National Parks and Wildlife to fabricate a pair of gun safes for their vehicles. We fabricated the safes out of 3mm steel with an internal door bracing, internal hinge mechanism and reinforcemnt around the key hole and housing for extra security and the door is made of 6mm steel.

Isuzu Truck Toolbox with Removable Shelves

Reference no. 5032

A recent toolbox out of the workshop for a customer all the way from Canberra. This toolbox we fabricated for his Isuzu truck features 8 adjustable shelves, our full electrical package and 8 tie down rings on the rear of the box.

Isuzu Truck Removable Toolbox and Underbodys

Reference no. 5012

We recently fabricated a large toolbox for an Isuzu truck that would be fitted to a stainless steel frame in order to be picked up and removed. For this same truck we also made up three underbody toolboxes as well as a 2.4m long underbody drawer.