Reference no. 5131

Custom toolbox for a truck with a tapered top toolbox with open storage. The bottom box features two drawers on both sides with a top storage section closed off with internal doors.

Reference no. 5018

This customer came to us looking to have some toolboxes made up for his Commodore. The boxes are an open design for large storage and are designed to clear his sports bar at the front. Up on the roof we fitted some unistrut to provide roof rack storage for his ladders. Underneath these two boxes is a large storage drawer that slides out the rear with a divider in the middle.

Reference no. 1979

This was a big job recently completed here at the workshop. A completely custom setup of a steel tray and full size canopy for the back of a Nissan Patrol. The tray was fitted out with 4 underbody toolboxes, short trundle drawer, 80L water tank at the front and aircraft style filler points for both tanks. The headboard is also different from what we normally do and extends out over the cab for extra roof top storage and to mount two camp lights, two mounting positions for a swivel hunting spot light and the large LED driving lightbar over the windscreen. The canopy fitout was designed with storage and efficiency in mind. The passenger side has a removable front panel to mount the electrical system to allowing the wiring to be hidden behind. Next to all of this is a stainless steel battery cage for his lithium battery and space for the 40L Evakool drawer fridge as well as a small drawer. The drivers side has two storage drawers, one with a pull out table underneath and storage pockets up top. The rear wall has two adjustable spare wheel mounts as well as some vents to allow ventilation for the inside of the canopy. To finish the job off we mounted the Bush Company 270XT awning on top of the canopy.

Reference no. 1919

A customer came to us with his brand new D-Max looking to get a completely custom and unique canopy fabricated to fit into his tub body. The design parameters for this job were to have as much usable space as possible and to follow the shape of the tub and sports bar while also retaining the factory roller shutter at the front. The canopy features 4 doors in total with one being incorporated into the tailgate for the lower section. This bottom section features a full slide out platform to follow the shape of the tub around the wheel arches allowing easy access to big and bulky items. The top section is a fixed shelf for additional storage and had to be designed with every bit of space in mind. The doors were fitted with central locking and there are multiple lights throughout the inside of this canopy. Up on top we fitted a Rhino Rack flat platform.

Reference no. 5044

A recently completed job for a dual cab Hino truck with many extras and accessories. The two large toolboxes have multiple storage drawers in one for small parts with a fixed shelf above while the other has adjustable shelves and two slide out parts organisers. The rear section of the tray has tie down track running around the full perimeter to allow many different options when strapping something to the tray. Also in the rear section are two gas bottle holders, a storage tub for a pair of wheel chocks, a swingout vice and a dual jerry can holder. We also fitted two batteries in an additional battery holder under the tray to power his 240V inverter, his interior door lights and the four work likes located at the front and rear of the toolboxes. Up on top of the headboard we also fitted a large work beacon controlled by a switch in the cab. Underneath we also fabricated an underbody toolbox and fitted a plastic water tank.

Reference no. 5074 & 5075

A unique toolbox fabricated for Sinclair Components to fit to their truck bodies. These toolboxes feature an open bottom storage section, a small drawer at the top on one side and an internal storage hatch with its own door within the toolbox itself.

Reference no. 5049

We were recently contacted by some rangers for the National Parks and Wildlife to fabricate a pair of gun safes for their vehicles. We fabricated the safes out of 3mm steel with an internal door bracing, internal hinge mechanism and reinforcemnt around the key hole and housing for extra security and the door is made of 6mm steel.

Reference no. 5032

A recent toolbox out of the workshop for a customer all the way from Canberra. This toolbox we fabricated for his Isuzu truck features 8 adjustable shelves, our full electrical package and 8 tie down rings on the rear of the box.

Reference no. 5012

We recently fabricated a large toolbox for an Isuzu truck that would be fitted to a stainless steel frame in order to be picked up and removed. For this same truck we also made up three underbody toolboxes as well as a 2.4m long underbody drawer.

Reference no. 4045 , 5021, 5057

We recently fabricated a few different water tanks for different customers in the workshop. One tank to go against the headboard inside a canopy and the other two are custom size tanks. All of our tanks are fully tig welded and have internal baffles for strength and to reduce water sloshing. We fit multiple drain and breather fittings and barbs on these tanks to suit the customers needs.